Siemens WM10K160IN Скачать руководство пользователя страница 32

Страница: 32 / 40

Positioning and connecting

In addition,

a hose clamp (24 - 40 mm

diameter, available from specialist

dealers) is required to connect the

water drain hose to a siphon.

Useful tools

■

Spirit level for levelling

■

Wrench with:

– WAF 13 for loosening the

transport locks, and

– WAF 17 for aligning the

appliance feet

Safety instructions

Warning

Risk of injury!

■

The washing machine is very heavy.

Be careful when lifting/transporting

the washing machine.

■

When the washing machine is lifted

by its protruding parts (e.g. the

washing machine door), the

components may break off and

cause injuries.

Do not lift the washing machine by

protruding parts.

■

If the hose and mains cables are not

routed properly, there is a risk of

tripping and injury.

Lay hoses and cables in such a way

that there is no risk of tripping.

Caution!

Damage to the appliance

Frozen hoses may rip/burst.

Do not install the washing machine in

areas exposed to frost or outdoors.

Caution!

Water damage

The connection points for the water

supply hose and water drain hose are

under high water pressure. To prevent

leaks and water damage, you must

follow the instructions in this section.

(

Mains cable

Bag:

■

Installation and operating

instructions

■

After-sales service location

directory*

■

Warranty*

■

Cover caps for openings left

after removing the transport

locks

■

Wrench*

Water drain hose

Elbow for securing the water drain

hose*

Water supply hose on standard/

Aqua-Secure models

Water filter*

*depending on the model

Содержание WM10K160IN









































Результаты поиска

Содержание WM10K160IN

Отзывы:

Похожие инструкции для WM10K160IN

Бренды по названию

Популярные бренды

Siemens WM10K160IN, Инструкция по эксплуатации и руководство по установке

Результаты поиска

Содержание WM10K160IN

Отзывы:

Похожие инструкции для WM10K160IN

Бренды по названию

Популярные бренды