en
Faults and what to do about them.
22
Caution!
Water damage
Any escaping water may cause water
damage.
Do not open the washing machine door
if water can be seen through the glass.
1.
Switch off the appliance. Disconnect
the mains plug.
2.
Drain the detergent solution
.
3.
Pull the emergency release
downwards with a tool and release.
The washing machine door can then
be opened.
Information on the display panel
Display
Cause/remedial action
Note:
Indicator lights for status displays and/or buttons flash:
Indicator lights
q
und
x
flash.
Close the washing machine door properly, laundry may be caught.
Indicator lights
0
und
x
flash.
■
Turn the water tap on fully,
■
The supply hose is kinked/trapped,
■
The water pressure is too low.
– Clean the filter.
– If an additional water filter has been installed (depending on model)
, check for contaminants and clean if required
~
sepa-
rate installation and cleaning instruction for water filter.
Indicator lights
0
und
q
flash.
■
The detergent solution pump is blocked. Clean the detergent solution
pump.
■
The drain hose/waste pipe is blocked. Clean the drain hose at the siphon.
All indicator lights flash.
Turn off the tap and call the after-sales service.
Содержание WM08K060HK
Страница 35: ...6 ...
