en
Detergents and care products
30
13 Detergents and care
products
Notes
¡
You can find further information in
the digital instruction manual by
scanning the QR code in the table
of contents or on www.siemens-
home.bsh-group.com .
¡
Observe the information on safety
→
The manufacturer's instructions for
use and dosage can be found on the
packaging.
Notes
¡
Only use liquid detergents that are
self-flowing
¡
Do not mix different liquid deter-
gents
¡
Do not mix detergent and fabric
softener
¡
Do not use products that have ex-
pired or are highly congealed
¡
Do not use products containing
solvents, caustic agents or volatile
substances (e.g. bleach)
¡
Use dyes sparingly as salt may
damage stainless steel
¡
Do not use bleaching agents in the
appliance
operation
14 Basic operation
operation
Note:
You can find further information
in the digital instruction manual by
scanning the QR code in the table of
contents or on www.siemens-
home.bsh-group.com .
14.1 Switching on the appli-
ance
Requirement:
The appliance has
been correctly installed and connec-
ted.
→
"Installation and connection",
▶
Press .
The switch-on process takes a few
seconds.
Note:
The lighting for the drum goes
out automatically.
14.2 Setting a programme
1.
Press the required programme.
→
2.
If necessary, adjust the pro-
gramme settings.
14.3 Adjusting the pro-
gramme settings
Requirement:
A programme has
been set.
→
"Setting a programme", Page 30
▶
Adjust the programme settings.
→
Observe the information about op-
erating logic.
Note:
The programme settings are
not saved permanently for the pro-
gramme.