Siemens VSZ2 SERIES, Инструкция по эксплуатации

Страница: 32 / 82

30
Using the dust container
If necessary , a dust container can be used in place of
a dust bag.
! Please note: The dust bag change indicator only
works in conjunction with a dust bag.
Figure
18
‡
Open the dust bag compartment lid.
‡
R emove the dust bag and insert the dust container.
‡
C lose the appliance lid.
Figure
19
S et the power setting to maximum for best results
when vacuuming.
We recommend that you reduce the setting only when
vacuuming very delicate materials.
E
m
ptying the dust container
In order to achieve the best possible vacuuming
results
, the dust container should be emptied after
every use or , at the latest , when dust at one point in
the container has reached the
m
ax marking.
When emptying the dust container , always check the
soiling level of the foam filter in the bottom of the
container.
When it is visibly soiled
, clean the filter as described
from
figure
24
onwards.
Figure
20
‡
Open the dust bag compartment lid by moving the
locking lever in the direction of the arrow.
Figure
21
‡
R emove the dust container from the appliance.
Figure
22
‡
Fold the carrying handle backwards , away from the
air intake opening.
‡
R emove the cover from the container and put it to
one side.
‡
Empty the container.
‡
Hook the cover into the container and the close it.
‡
Fold up the carrying handle and lock it in place on
the cover.
Figure
23
‡
R einsert the dust container into the appliance and
close the dust bag compartment lid.
!
Please note: The inside of the dust container
m
ay beco
m
e scratched with use and start to look
opaque. This does not, however, affect the perfor
-
m
ance of the vacuu
m
cleaner in any way, i.e. it will
continue to function as nor
m
al.
Cleaning the filter fleece (a) and the foa
m
filter (b) in
the dust container
The filter must be cleaned:
„
After any malfunctions
,
i.e. after a blockage is cleared
„
If there is visible dirt on the filter
„
At least every three months
Figure
12
When vacuuming on stairs for example , the appliance
can also be carried by the handle.
After using the appliance
Figure
13
‡
P ull out the mains plug.
‡
Briefly pull on the power cord and then release it
(the power cord retracts automatically).
Figure
14
To store/transport the appliance , you can use the
storage aid on the underside of the appliance.
S tand the appliance up on its end. S lide the hook on
the floor tool into the recess on the underside of the
appliance.
You have purchased a floor vacuum cleaner which can
vacuum up any type of dry dirt using the dust contai-
ner or dust bag.
We recommend that you use:
− The dust bag principally for everyday household
cleaning.
− The dust container for DIY-related cleaning in parti-
cular , e.g. to vacuum up wood shavings , etc.
Using dust bags
Replacing the dust bag
Figure
15
‡
If the dust bag change indicator in the lid is filled
completely when the floor tool is lifted from the
floor with the highest suction level selected
, the
dust bag must be changed , even though it may not
yet be full. Even if the dust bag is not full , it may
still need changing , due to the type of dust which
has been vacuumed.
First check that the nozzle , suction pipe and flexib-
le hose are not blocked , as this would also lead to
the dust bag change indicator being triggered.
Figure
16
‡
Unlock the lid by releasing the locking lever in the
direction of the arrow.
Figure
17
a) C lose the dust bag by pulling on the locking tab and
then remove it.
b) Insert a new dust bag by pushing it fully into the
holder.
! Please note: The lid will only close if a dust bag
has been inserted.
* Depending on model