Siemens VS Z5, Инструкция по эксплуатации

Страница: 43 / 114

41
*depending on model
Vacuuming
! Please note:
Floor tools are subject to a certain amount of
wear,depending on the type of hard floor you have
(e.g. rough, rustic tiles). Therefore, you must check
the underside of the floor tool at regular intervals.
Worn undersides of floor tools may have sharp edges
that can damage sensitive hard floors, such as
parquet or linoleum. The manufacturer does not
accept any responsibility for damage caused by worn
floor tools.
Figure
Adjusting the floor tool:
Rugs and carpets
=>
hard floors =>
Figure
a)
IBy placing the nozzle connecting piece in vertically,
it is locked into this position.
b) IBy pressing the release button, the the catch is
released.
Figure
While the vacuum cleaner is in use, the
ELECTROMATIC® brush can be switched on or off by
pressing the switch button.
Figure
To achieve the best cleaning results, move the
ELECTROMATIC® brush slowly forwards and
backwards.
Only brush carpet fringes in the direction of the arrow.
Figure
To ensure that you can gently clean your carpet, you
can use the button to adjust the height between five
settings.
The selected setting is displayed in the window by
pressing the button:
1: Smallest ground clearance
5: Maximum ground clearance
Press and hold the button until the required
setting is displayed.
Figure
If the brush roller becomes blocked during use as a
result of vacuuming up bulky debris or because carpet
fringes have become wrapped around the roller, the
motor automatically switches off.
Before carrying out any maintenance, switch off the
vacuum cleaner and
remove the appliance's mains plug.
Use scissors to cut through threads and hairs wound
round the rollers.
Use the crevice nozzle to vacuum away these threads
and hairs.
10
11
12
13
14
15
Vacuuming with accessories
Figure
4
Remove the crevice nozzle or upholstery nozzle from
the accessories compartment in the appliance lid.
Figure
Attach the nozzles to the suction pipe or handle as
required:
a) Crevice nozzle for vacuuming crevices and corners,
etc.
b) Upholstery nozzle for vacuuming upholstered
furniture, curtains, etc.
Figure
4
After use, place the crevice or upholstery nozzle back
into the accessories compartment in the appliance
lid.
Figure Hard-floor tool
For vacuuming hard floor coverings
(tiles, parquet flooring, etc.)
4
Push the telescopic tube into the connecting piece
of the hard floor tool until it locks in place.
4
To release the connection, press the locking collar
and pull out the telescopic tube.
Figure
4
You can use the nozzle parking aid on the back of the
appliance if you wish to stop vacuuming for a short
time.
4
Once you have switched off the appliance, slide the
hook on the floor tool into the recess on the rear of
the appliance.
Figure
To overcome obstacles, e.g. steps, the appliance can
also be carried by the handle on the appliance body.
When you have finished vacuuming
Figure
4
Pull out the mains plug.
4
Briefly pull the power cord and release
(The power cord rewinds automatically).
Figure
4
To store or transport the appliance, you can use the
storage aid on the underside of the appliance.
4
Stand the appliance upright. Slide the catch on the
floor tool into the groove on the underside of the
vacuum cleaner.
20
21
22
23
19
18
17
16