Setup
80
SX1 K1 am-en, A31008-H6500-A5-1-7619 (29. July 2003, 19:32)
©
Siem
ens AG 2001
, I
:\Mob
il\SX1_(K
1)\a
m
\ex_sd
l\k1gb
_setup.fm
Connection
You need access points to
access the Internet for example to
• send/receive e-mails (p. 38)
• send/receive multimedia
messages (p. 37)
• use WAP applications (p. 51)
• activate modem operation
To connect to an access point, a data
connection is needed. There may be
access points predefined by your
provider. Otherwise your provider
will provide you with further
information on this.
C
K
Setup
K
Settings
K
Connection
K
Select a function:
Access points
A list of default or defined access
points may be shown. Select an
access point from the list or define a
new one.
New access point
Options
K
New access point
Use default settings
If you want to use default entries.
Use existing settings
If you want to change an existing
entry to create a new access point,
select it from the list.
There are three types of connection
available:
GSM data call
Data transmission rate up to 14.4 kbps.
To configure this access point:
•
Connection name
: your choice
•
Data bearer
:
GSM data
•
Access point name
: from provider
•
User name
: from provider if required
•
Prompt password
: choose
Yes
if you
want to enter it at every logon
•
Password
: from provider if required
•
Authentication
: normal/Secure
•
Gateway IP address
: from provider
•
Homepage
: address of WAP service or
multimedia messaging center
•
Session mode
: e.g. Permanent
•
Connection security
: from provider
•
Data call type
: analog, ISDN v.110, ISDN
v. 120
•
Maximum data speed
: automatic, 9600,
14400,19200,28800
Note
You may receive the settings in a smart
message. If you save them, the received
settings are automatically used as
Preferred connection
, see
Messages
,
