Siemens SpeedStream 5450 Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 83

Siemens SpeedStream 5450 Скачать руководство пользователя страница 36

31

6

Chapter 6

Configuring Advanced Features

This chapter explains how to configure advanced features on the router.

This chapter contains details for configuring the many advanced features available with your router.
Some of the features described below require at least a mid-level understanding of networking principles.
These features are provided to allow configuration flexibility for advanced users.

These advanced features are accessed through the

Gateway

button available on the toolbar on the

“Main” window. The options that display under the

Gateway Options

pane in the left navigation pane are

based on how you logged into the system. If you logged in as the administrator, all options are turned on
and enabled. If you logged in as a user, only the Gateway Health, Customize, and Reboot options are
enabled.

Gateway Options discussed in this chapter

This chapter is organized into parts that correspond to the following buttons shown in the

Gateway

Options

pane.

Get information about ISP
connections. You can also use this
option to set ISP configuration
parameters. This should only be
done when instructed by your ISP.

View network-related
information

Configure security for the router.

Reboot the router.

«
...
34
35
36
37
38
...
»

Содержание SpeedStream 5450




















































































Отзывы:

Нет отзывов