
en
Installation and connection
54
■
Use only a residual current operated
circuit-breaker which features the
symbol
‚
. Only this extension
guarantees compliance with
the currently valid regulations.
■
The appliance features a water
damage protection system. Please
note the system will function
only
when the power supply
is connected.
Removal
Also observe
the sequence of worksteps here.
1.
Disconnect the appliance from the
power supply.
2.
Turn off the tap.
3.
Undo the waste water and drinking
water connection.
4.
Loosen fastening screws for the
furniture parts.
5.
If fitted, remove the base panel.
6.
Pull out the appliance, carefully
pulling the hose behind.
Transporting
Empty the dishwasher and secure loose
parts.
Drain the appliance according
to the following steps:
1.
Turn on the tap.
2.
Open the door.
3.
Switch on ON/OFF switch
(
.
4.
Select programme with the highest
temperature.
The estimated programme duration
is indicated on the display window at
the top
@
.
5.
Press START button
)*
.
6.
Close the door.
Programme sequence starts.
7.
Open the door after
approx. 4 minutes.
8.
Press START button
)*
until
“Program was terminated”/“Ready in
one minute.” is indicated at the top
of the display window
@
.
9.
Close the door.
10.
Open the door after approx. 1
minute.
The display window at the top
@
indicates; “Finished”.
11.
Switch off ON/OFF switch
(
.
12.
Turn off the tap, disconnect supply
hose and drain water.
Note:
Transport appliance upright only.
This prevents residual water from
running into the machine control
and damaging the programme
sequence.
Protection against frost
Protecti
on agains
t frost
(Emptying
the appli
ance)
If the appliance is in a room where there
is a risk of frost (e.g. holiday home),
empty the appliance completely (see
Transportation).
6XEMHFWWRFKDQJHV