en
Getting to know your appliance
12
Time setting
Time sett
ing
When the appliance is switched on the
for the first time, the time starts at 12:00
o’clock.
Set the time as follows:
1.
Open the door.
2.
Switch on ON/OFF switch
(
.
3.
Press Info button
{
8
for 3
seconds until the following text is
indicated on the display window at
the top
@
:
Scroll with
< >
Set with
- +
Leave with Setup 3 sec.
4.
Keep pressing button
>
)R
until the
time setting is indicated on the
display window at the top
@
.
5.
Make the setting with setting buttons
+ -
X
. If the selection buttons
+ -
X
are held down, the set values
are changed in 10-minute steps.
6.
Press and hold the Info button
{
8
for 3 seconds.
The chosen setting has now been
stored.
Note:
If the appliance was
disconnected from the power supply for
a prolonged period, the time starts at
12:00 o’clock. Set the time.
Initial start-up
When the dishwasher is switched on for
the first time, you are taken directly to
the settings for the initial start-up.
Note:
If you select Home Connect
during the initial start-up, make further
settings via your dishwasher App.
Observe the supplied Home Connect
documents.
On the display window at the top
@
the following text appears for manual
selection:
Scroll with
< >
Set with
- +
Leave with Setup 3 sec.
The required settings for the initial
start-up are listed in the table below.
To change the setting:
1.
Keep pressing button
>
)R
until the
required setting is displayed.
Change the setting with setting
buttons
+ -
X
.
2.
Press and hold the Info button
{
8
for 3 seconds.
The chosen setting has now been
stored.
Initial start-up settings
Factory setting
Infotext
by pressing Info button
{
Sprache/Language
Deutsch
Language selection.
Home Connect
Manual/Home Connect
Manual/Home Connect.
Time format
24 h
12h or 24h.
Time setting
12:00
Set the current time.
Water hardness
°E 16 - 20 medium
Adjustment to the local water hardness.
When using Multitabs, select setting 0 - 6.
* depending on the features of your dishwasher
