background image

6.2

Commissioning the SITRANS I300 ........................................................................................28

6.3

Setting the data rate...............................................................................................................29

7

Service and maintenance ...........................................................................................................................31
7.1

Basic safety notes ..................................................................................................................31

7.1.1

Maintenance...........................................................................................................................31

7.2

Cleaning .................................................................................................................................31

7.3

Maintenance and repair work.................................................................................................32

7.3.1

Hot parts in the device ...........................................................................................................32

7.4

Return procedure ...................................................................................................................32

7.5

Disposal .................................................................................................................................33

8

Troubleshooting/FAQs................................................................................................................................35
8.1

Diagnosing SITRANS I300.....................................................................................................35

9

Technical data ............................................................................................................................................37
9.1

Operating conditions ..............................................................................................................37

9.2

Dimensions and weight ..........................................................................................................37

9.3

Power supply..........................................................................................................................37

9.4

Diagnostics.............................................................................................................................38

9.5

Communication Specification.................................................................................................39

9.6

Certificates and Approvals .....................................................................................................39

A

Certificates and support..............................................................................................................................41
A.1

Technical support...................................................................................................................41

A.2

Certificates .............................................................................................................................41

Index...........................................................................................................................................................43

Table of contents

SITRANS I300 Isolating power supply with EIA-485 interface

4

Operating Instructions, 01/2019, A5E45099319-AA

Содержание SITRANS I300













































Отзывы: