manualshive.com logo in svg

Siemens SITRANS FUH1010, Инструкция по эксплуатации товара, Страница: 57 / 264

Поделиться
Скачать
Siemens SITRANS FUH1010 Скачать руководство пользователя страница 57

Connecting 

 

5.6 Sensor Installation 

 

FUH1010 IP65 NEMA 4X Precision Volume 

56

 

Operating Instructions, 01/2013, A5E32122003-AA 

5.6.3

 

Reflect Mount 

Mounting Frame Installation 

1.

 

On a flat surface, attach the Spacer Bar to a Mounting Frame so that the Reference Hole 

on the Spacer Bar fits over the metal post on the platform of the frame. Tighten the 

clamping screw. 

2.

 

Slide the second Mounting Frame onto the other end of the Spacer Bar and align the 

Number Index Hole with the metal post on the platform. Then tighten the clamping screw. 

Ensure that the angled sides of both frames face away from each other. 

3.

 

Wrap a Mounting Strap around the pipe. Make sure to position it so there is easy access 

to the Mounting Strap Adjusting Screw. 

4.

 

At the mounting location, place the Mounting Frame/Spacer Bar Assembly on the pipe so 

that it rests on the top of the pipe. 

5.

 

Engage the end of the Mounting Strap with the Mounting Strap Adjusting Screw. 

6.

 

Slide strap under the spring clip of one of the Mounting Frames. 

7.

 

Tighten the Mounting Strap Screw enough to take up all of the slack, but not enough to 

prevent rotation of the assembly. Attach the second mounting strap. 

8.

 

Rotate the assembly on the pipe to the final conditioned location, ensuring that it is 

straight along the pipe axis. (Refer to the sensor orientation diagram) 

9.

 

Tighten the mounting straps to seat the assembly firmly on the pipe. Do not over tighten. 

Содержание SITRANS FUH1010









































































































































































































































































Отзывы:

Нет отзывов