Safety
6
Siemens Building Technologies
Fire Safety & Security Products
02.2009
Damage due to unsuitable mounting location
z
Observe the environmental requirements recommended by the manufacturer.
See Section 3 Technical data.
z
Do not operate the device close to sources of powerful electromagnetic
radiation.
z
Do not operate the device in dusty places.
z
The device should only be used for indoor applications.
z
Do not expose the device to mechanical vibrations or shocks.
z
Protect the device against moisture.
z
Place the unit on a stable surface that will hold its weight.
Damage to the device due to lack of ventilation
z
Do not block or cover the ventilation openings of the device. To ensure sufficient
ventilation please also read the instructions in this manual.
z
Do not stack several devices on top of each other and do not place any objects
on the device.
Danger of electrical shock/fire hazard/damage to the device due to incorrect
connection
z
Connect the device only to power sources with the specified voltage. Voltage
supply requirements can be found on the rating label of the device.
z
Use the device only in conjunction with a power supply cable that has been
approved in your country and complies with the national standards.
1.2.3
Service and maintenance
z
Do not attempt to service or modify this device yourself. Refer this work to
qualified service personnel.
1.3
Meaning of the written warning notices
The severity of a hazard is indicated by the following written warning notices.
Signal word
Type of risk
CAUTION
There is a risk of minor to medium injuries or damage to property.
IMPORTANT
Malfunctioning may result
1.4
Meaning of the hazard symbols
The nature of the hazard is indicated by icons.
Warning of a hazard