Installation
43
Siemens Building Technologies
Fire Safety & Security Products
02.2009
EN
Connections
Signal SISTORE
unit
9-pin Sub-D socket
CCDA1435
A (Rx/Tx +)
2
Data +
B (Rx/Tx -)
3
Data -
CCDA1435
interface configuration
z
Baud rate: 9600
z
Parity: None
8.4.7
Connecting pan-and-tilt unit PT40
Fig. 23
Pan-and-tilt unit PT40 – system overview
For a more detailed description of the connections please refer to Section
141H
6
142H
Description of SISTORE
MX / MX DVD or Section
143H
7
144H
Description of SISTORE MX 3G / MX 3G DVD.
1.
Connect the pan-and-tilt unit to the SISTORE (see
145H
Fig. 23).
2.
Connect the camera to the SISTORE (see
146H
Fig. 23).
Further information on this can be found in the instruction manuals for the
pan-and-tilt unit, the control unit and the camera.
3.
Start the SISTORE MX application software.
4.
Switch to configuration mode.
5.
Select the
Cameras
tab.
6.
Mark the checkbox
PTZ
.
7.
Choose the camera type from the first list box.
8.
Choose the interface from the second list box.
9.
Click
Apply
.
Î
The interface for the camera is enabled.
Further information on this can be found in the SISTORE MX Configuration
Manual.
Connections
Signal SISTORE
unit
9-pin Sub-D socket
CDC0501/0502 (J6)
A (Rx/Tx +)
2
Rx/Tx +
B (Rx/Tx -)
3
Rx/Tx -