Functional description
I IA CE
SIPLUS RIC IEC on S7 V1.5
Page 12 of 28
©SIEMENS AG 2013
3.1.1.2. Block parameter with its default assignment and short comment
FB161
Type
Default
Block-comment / short description
Comp_ID
IN
BYTE
B#16#0
Identifier for Diagnostic-Functions
Para_Image_DB
IN
INT
0
Number of a para-/image-DB; with 0 a DB will
be created at runtime
max_No_of_Images
IN
INT
256
Default: 256; dimension of dynamic generated
data block for the images
P_Application_Src
IN
DWORD
DW#16#0
Pointer which has to be connected to
'S7_IEC_Config' - Module (Source of info)
ASDU_Adr_Src
IN
DINT
L#65535
Default: 65535=FFFFh -> All;
First_Info_Adr_Src
IN
DINT
L#1
Default: 1
Last_Info_Adr_Src
IN
DINT
L#16777215
Default: max=16777215=FFFFFFh;
Filt_15_13_11_9_7_5_3_
1
IN
BYTE
B#16#FF
TI-Filter for IT/MEC/MEB/MEA/BO/ST/DP/SP:
Def: all TIs are forwarded (B#16#FF)
P_SLi
IN
DWORD
DW#16#0
must be connected with P_to_SLi from
SL_Org_ASDU - Module
Tx_Prio_L
IN
INT
1
Priority of transmission with Prio L: 0 (highest) -
15 (lowest) Default = 1
Tx_Prio_H
IN
INT
0
Priority of transmission with Prio H: 0 (highest) -
15 (lowest) Default = 0
Pri-
oH_15_13_11_9_7_5_3_
1
IN
BYTE
B#16#8F
Priority for transmission: 0: Low, 1: High / De-
fault = B#16#8F (MEs=Prio Low)
wTime_15_13_11_9_7_5
_3_1
IN
BYTE
B#16#FF
Transmission with(1) or without(0) Timestamp if
COT<20(requested);Def = B#16#FF
Inro_QOI
IN
BYTE
B#16#14
0: No Reaction; 20 (=14hex,default) General
interrogation; 21-36 -> Group 1-16
IC_15_13_11_9_7_5_3_
1
IN
BYTE
B#16#7F
active. TIs will be transmitted within an interro-
gation; Default: B#16#7F
TwoC_15_13_11_9_7_5
_3_1
IN
BYTE
B#16#0
active. TIs will be forwarded without change of
val/state, if rcv. COT<20. Def:0;
Threshold_Val_ME
IN
Real
0.0
0.0 without (def), >0: Threshold value (digits) for
forwarding of measured val.
FB_RetVal
OUT
WORD
W#16#0
positive Values -> ok; negative Values
(16#8xxx) -> Error
IM_DB_No
OUT
INT
0
DB number for the internal process image, cre-
ated by this module
No_used_IMs
OUT
INT
0
Number of information, actually placed in the
image data block
New_Image
OUT
BOOL
FALSE
Signals that the number of Images has been
increased within this cycle
