Siemens SIPLUS ECC8000, Руководство по эксплуатации

Страница: 12 / 36

Description
3.4 Diagnostics on CM-100
SYS-101A
12
Operating Instructions, 05/2011, A5E03431563F-01
The meaning of the individual displays is shown in the following tables:
Operating states
LED Description of operating state
Color Status
- not lit Device is not active, switched off, or is booting up
 No power supply

Device defective
orange flashing (1 Hz) Device is waiting to be enabled; enable not issued via enable input
flashing (5 Hz) Device is waiting to be connected; connect electric vehicle
flashing (1 Hz) Electric vehicle connected, not yet ready for charging
green
permanently on Charging process active
Fault conditions
LED Error Fault correction
Color Status
flashing (1 Hz) Wrong or defective
charging cable
connected

Connect charging cable with sufficient
current carrying capacity
 Replace defective charging cable
one short flash,
3 s off
5 V: Proximity signal
outside of tolerance
range

Auxiliary voltage
(AV) overloaded or
short-circuited

Device defective
 Check wiring at the AV or HL and EN
connection

Replace device
two short
flashes,
3 s off
Pilot invalid:
Control pilot signal has
undefined level
 Defective charging cable, replace

Defective electric vehicle, consult
workshop
 Check cabling of pilot signal
red
three short
flashes,
3 s off
Pilot short:
Control pilot signal is
short-circuited
 Defective charging cable, replace

Defective electric vehicle, consult
workshop
 Check cabling of pilot signal