Siemens SINAMICS PERFECT HARMONY GH150 6SL3826, Руководство по эксплуатации

Страница: 61 / 136

4.3.5 Transport with a crane
WARNING
Danger due to incorrect transport
If the transport unit is not properly transported with a crane, the transport unit/cabinet could fall
or tip over This can result in death, serious injury or material damage.
● Carefully comply with the safety instructions relevant for transport.
● Carefully observe the information regarding the center of gravity on the transport unit.
WARNING
Danger due to unsuitable cross-arms
If inappropriate cross-arms are used, the transport unit or cabinet can tip over. This can result
in death, serious injury or material damage.
● Observe the specifications provided in DIN EN 13155 on cross-arms.
Observe the following points for safe transport:
● When using a crane to transport the equipment, keep to the permissible lifting capacity. Pay
attention to the center of gravity position.
● If the cabinet center of gravity is off-center, use suitable lifting equipment, e.g. a lifting beam.
4.3.6 Transporting transportation units packed in boxes
Transportation with the fork-lift truck
WARNING
Danger when a transport unit/device tips over
If the forks are too short, this can cause the transportation unit/the device to tip over resulting
in death, serious injury, or damage inside the cabinet.
● The forks of the truck must protrude at the rear of the transportation unit.
● Only use forklifts approved for the purpose of transporting the devices.
Preparations for use
4.3 Transport
SINAMICS PERFECT HARMONY GH150 6SL3826
Operating Instructions 05/2020
61