Siemens SINAMICS GL150, Руководство по эксплуатации

Страница: 20 / 168

● Electronic components should not be brought into contact with electrically insulating
materials such as plastic foil, plastic parts, insulating table supports or clothing made of
synthetic fibers.
● Bring components into contact only with ESD-compliant materials, e.g. ESD tables, ESD
surfaces, ESD packaging.
● Only carry out measurements on the components if one of the following conditions is met:
– The measuring device is grounded with a protective conductor, for example.
– The measuring head of a floating measuring device has been discharged directly before
the measurement.
The necessary ESD protective measures for the entire working range for electrostatically
sensitive devices are illustrated once again in the following drawings.
Precise instructions for ESD protective measures are specified in the standard
DIN EN 61340‑5‑1.
①
Sitting a Conductive floor cover‐
ing
1)
d ESD clothing
②
Standing b ESD furniture e ESD wrist strap
③
Standing/sitting c Wearing of ESD shoes or
ESD shoe grounding
strips
2)
f Cabinet ground connection
1)
Only effective in conjunction with ESD shoes or ESD shoe grounding strips
2)
Only effective in conjunction with conductive floor covering
2.7 Information for nominated persons in control of an electrical
installation
2.7.1 Proper usage
These devices are intended to be permanently installed in closed and dry rooms with a clean
atmosphere. You can find the ambient and operating temperatures to be adhered to in the
technical data. If the described environmental conditions are not observed, warranty claims
and other claims may be rejected.
Safety information
2.7 Information for nominated persons in control of an electrical installation
SINAMICS GL150 6SL38555UN113KA0Z
20
Operating Instructions Rev.201910281450 EXAMPLE