Siemens SIMOTICS S-1FT2 страница 15 Скачать руководство пользователя

Страница: 15 / 102

Fundamental safety instructions

1.1 General safety instructions

SIMOTICS S-1FT2 synchronous motors for SINAMICS S120
Operating Instructions, 07/2021, A5E50610821B AB

WARNING

Unexpected movement of machines caused by radio devices or mobile phones

When radio devices or mobile phones with a transmission power > 1 W are used in the

immediate vicinity of components, they may cause the equipment to malfunction.

Malfunctions may impair the functional safety of machines and can therefore put people in

danger or lead to property damage.
•

If you come closer than around 2 m to such components, switch off any radios or mobile

phones.

•

Use the "SIEMENS Industry Online Support app" only on equipment that has already been

switched off.

WARNING

Unrecognized dangers due to missing or illegible warning labels

Dangers might not be recognized if warning labels are missing or illegible. Unrecognized

dangers may cause accidents resulting in serious injury or death.
•

Check that the warning labels are complete based on the documentation.

•

Attach any missing warning labels to the components, where necessary in the national

language.

•

Replace illegible warning labels.

WARNING

Unexpected movement of machines caused by inactive safety functions

Inactive or non-adapted safety functions can trigger unexpected machine movements that

may result in serious injury or death.
•

Observe the information in the appropriate product documentation before

commissioning.

•

Carry out a safety inspection for functions relevant to safety on the entire system,

including all safety-related components.

•

Ensure that the safety functions used in your drives and automation tasks are adjusted

and activated through appropriate parameterizing.

•

Perform a function test.

•

Only put your plant into live operation once you have guaranteed that the functions

relevant to safety are running correctly.

Note
Important safety notices for Safety Integrated functions

If you want to use Safety Integrated functions, you must observe the safety notices in the

Safety Integrated manuals.

Содержание SIMOTICS S-1FT2







































































































Результаты поиска

Содержание SIMOTICS S-1FT2

Отзывы:

Похожие инструкции для SIMOTICS S-1FT2

Бренды по названию

Популярные бренды

Siemens SIMOTICS S-1FT2, Руководство по эксплуатации

Результаты поиска

Содержание SIMOTICS S-1FT2

Отзывы:

Похожие инструкции для SIMOTICS S-1FT2

Бренды по названию

Популярные бренды