Total system with full options
5.4
Interfaces
The central processor controls and administers the entire SIMATRIX NEO V2
system with all its video inputs and outputs, detector groups, switch outputs and
interfaces to keyboards, CDCs or an external computer.
The control profile depends on the way system parameters have been set (see the
SIMATRIX NEO V2 programming manual).
Fig. 4
Interfaces on the back of the device
A
1
COM4:
RS232 communication interfaces; data exchange
with external computers or systems
B
Telemetry ports 1 – 4:
RS422 connections for dome
cameras
2
COM2/3:
RS232 communication interfaces for data
exchange with external computers or systems
C
Keyboard:
for connecting up to 8 keyboards
3
LAN, not yet supported
D
Video output 1 Vss /75 Ohm:
Video outputs
4
SysLink:
RS485 system bus for system extension and for
connecting the alarm box
E
Video input 1 Vss /75 Ohm:
Video inputs
5
Alarm out
8 x open-collector outputs and master relay
6
Alarm 1 - 16/ TTY out
For connecting CDCs and detection groups
7
Alarm 17 -32/ TTY out
For connecting CDCs and detection groups
19
Siemens AB
Security Products
