Siemens SIMATIC SCALANCE X-300M PoE Скачать руководство пользователя страница 18

Страница: 18 / 74

Interfaces of devices without optical ports:

Interface

Property

Electrical RJ-45 port for 10/100 Mbps.

[-]

Electrical RJ-45 port for 10/100 Mbps or 10/100/1000 Mbps.

Interfaces of devices with optical ports:

Interface

Property

SC port 100 Mbps multimode FO cable (up to max. 5 km).

LD FE

SC port 100 Mbps single mode FO cable (up to max. 26 km).

[-]

SC port 1000 Mbps multimode FO cable (up to max. 750 m).

SC port 1000 Mbps single mode FO cable (up to max. 10 km).

SC port 1000 Mbps single mode FO cable (up to max. 40 km).

LH+

SC port 1000 Mbps single mode FO cable (up to max. 70 km).

If information applies to all devices, the term "IE Switches X-300" is used. If information applies

to only a particular product group, the relevant names will be used without extra information on

the type or number of interfaces. Examples: "X-300" stands for non-modular devices with a

compact housing, "XR-300" means all rack devices, "X-300M" means all modular devices etc.

Unpacking and checking

WARNING

Do not use any parts that show evidence of damage
If you use damaged parts, there is no guarantee that the device will function according to the

specification.
If you use damaged parts, this can lead to the following problems:
● Injury to persons
● Loss of the approvals
● Violation of the EMC regulations
● Damage to the device and other components
Use only undamaged parts.

1. Make sure that the package is complete.
2. Check all the parts for transport damage.

Scope of delivery

Note
When shipped, the slots for the media modules have dummy covers fitted.

Device description
4.1 Product overview

SCALANCE X-300M PoE

Compact Operating Instructions, 11/2019, A5E02630810-13

Содержание SIMATIC SCALANCE X-300M PoE











































































Результаты поиска

Содержание SIMATIC SCALANCE X-300M PoE

Отзывы:

Похожие инструкции для SIMATIC SCALANCE X-300M PoE

Бренды по названию

Популярные бренды

Siemens SIMATIC SCALANCE X-300M PoE, Краткое руководство по эксплуатации

Результаты поиска

Содержание SIMATIC SCALANCE X-300M PoE

Отзывы:

Похожие инструкции для SIMATIC SCALANCE X-300M PoE

Бренды по названию

Популярные бренды