manualshive.com logo in svg

Siemens SIMATIC S5-115F, Руководство пользователя


Поделиться
Скачать
background image

S5-115F Manual 

 Installation Guidelines

Load power supply

The load power supply supplies the following:
•

Input and output circuits (load circuits)

•

Sensors and actuators.

For monitoring reasons, both control and load circuits should be connected to the same power
supply.
We recommend that you use our load power supply units from the 6EV1 series. If you decide to use
load power supply units of a different type, please note that you must monitor the output
voltage. The output voltage of a 24 V DC load voltage supply unit must not exceed 30 V DC.
Modules may be destroyed at higher voltages.

Warning

For SIMATIC modules supplied with functional extra-low voltages 
(V   60 V DC, V   25 V AC), you require load power supply units with safe (electrical)
isolation to DIN VDE 0160.

!

Load power supply for non-floating modules

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

If you use non-floating modules, you must create a common reference potential for the internal
control circuits of the PLC and for the load circuits. For this reason, connect the reference potential
of the load power supply unit with the ground connection of the PLC (PE terminal or       ). The
ground connection is permanently connected to the internal reference potential of the controller.

Load power supply for floating modules

Note

If you use switched-mode power supply units to supply floating analog modules and
BEROs, you must first run this supply over a mains filter.

Dimensioning the load power supplies

The electronic short-circuit protection of DO modules activates only when triple the rated current
is exceeded. For this reason, dimension the load power supply units in such a way that the power
supply can deliver the current required for switching off in the case of a short-circuit at an output.

If the load power supply unit has not been sufficiently dimensioned, this can result in a current
higher than the rated current flowing for an extended period in the case of a short-circuit at
digital outputs, without the short-circuit protection of the DO module activating. Overrange
operation can destroy the module.

EWA 4NEB 811 6148-02

3-33

Содержание SIMATIC S5-115F






































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SIMATIC S5-115F

ABB ControlMaster CM15 Commissioning Instructions preview
ControlMaster CM15
Бренд: ABB Страницы: 28
Veer CRUISER Instruction Manual preview
CRUISER
Бренд: Veer Страницы: 2
Jabra TAG Quick Start Manual preview
TAG
Бренд: Jabra Страницы: 18
nekos SKY 650 Manual For Installation And User Manual preview
SKY 650
Бренд: nekos Страницы: 8
nekos SKY 450 Installation And Use Manual preview
SKY 450
Бренд: nekos Страницы: 8
Neles PB2 Series Installation Maintenance And Operating Instructions preview
PB2 Series
Бренд: Neles Страницы: 12
Saab R5 SUPREME AIS Short Instruction preview
R5 SUPREME AIS
Бренд: Saab Страницы: 4
YASKAWA U1000 iQpump Drive Quick Start Quide preview
U1000 iQpump Drive
Бренд: YASKAWA Страницы: 26
YASKAWA Z1000 CIMR-ZU*A Series Quick Start Up Manual preview
Z1000 CIMR-ZU*A Series
Бренд: YASKAWA Страницы: 2
YASKAWA SIEMENS CNC Series Maintenance Manual, Serviceman Handbook preview
CNC Series
Бренд: YASKAWA SIEMENS Страницы: 373
YOKOGAWA UT35A-L User Manual preview
UT35A-L
Бренд: YOKOGAWA Страницы: 150
YOODA NANO Series Quick Start Manual preview
NANO Series
Бренд: YOODA Страницы: 3
YMGI 584 Series User Manual preview
584 Series
Бренд: YMGI Страницы: 8
Ziton ZP1-X3E Series Operation Manual preview
ZP1-X3E Series
Бренд: Ziton Страницы: 36
DMX4ALL ArtNet-DMX Mux16 User Manual preview
ArtNet-DMX Mux16
Бренд: DMX4ALL Страницы: 21
praher SUPERSTAR E-3000/F2 Operating Instructions Manual preview
SUPERSTAR E-3000/F2
Бренд: praher Страницы: 10
IDEC HR6S-S Original Instructions Manual preview
HR6S-S
Бренд: IDEC Страницы: 97
WAGO 767-4803/000-800 Manual preview
767-4803/000-800
Бренд: WAGO Страницы: 80

Бренды по названию

Популярные бренды

Загрузить еще бренды