manualshive.com logo in svg

Siemens SIMATIC S5-115F, Руководство пользователя


Поделиться
Скачать
background image

Installation Guidelines 

 S5-115F Manual

PS 951 power supply module

The PS 951 power supply module supplies the following:
•

CPU

•

I/O bus

•

Control circuits of the input/output modules.

The following table gives you an overview of the power supply modules which can be used in the
S5-115F.

Table 3-3.   Overview of Power Supply Modules for S5-115F

Power Supply

Module

Input

Voltage

Output

Current

Galvanic

Isolation

Remarks

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

6ES5 951-7ND21

6ES5 951-7ND31

6ES5 951-7ND41

24 V DC

24 V DC

24 V DC

Max. 7 A

Max. 7 A

Max. 7 A

No

Yes

Yes

High-level external voltage monitor
required

To be replaced by 6ES5 951-7ND41

--------------------

Please note the following points when using the PS 951 power supply module:
•

S5-115F central controllers and expansion units may only be operated with the power supply
modules listed in Table 3-3.
These power supply modules have been prototype-tested and approved for use in safety-
related systems.

•

The PS 951-7ND31 and PS 951-7ND41 power supply modules have safe electrical isolation to
DIN VDE 0160. The 24 V DC input voltage must be a functional extra-low voltage in accordance
with DIN VDE 0100 or a comparable standard. If not, the PE terminal must be connected to the
protective ground wire.

•

The PS 951-7ND21 power supply module has 

no galvanic isolation between the primary and

secondary sides. If you want to use this module, you will require high-level monitoring
facilities for the 5 V DC operating voltage on the secondary side. The 24 V DC input voltage
must be switched off automatically in the event of overvoltage.

Note

Since the S5-115F is operated without fans for safety reasons, the power supply
module must not be loaded with more than the rated value of 7 A/5 V. This means that
the current consumption of all the modules used must not exceed 7 A.

•

Magnetic voltage stabilizers must not be connected direct on the input side of the power
supply module!
If you use magnetic voltage stabilizers in parallel circuit branches, there is a likelihood of
overvoltages, which could destroy the power supply module! Please consult your local
SIEMENS regional office in such cases.

3-32

EWA 4NEB 811 6148-02

Содержание SIMATIC S5-115F






































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SIMATIC S5-115F

Lakeshore 336 User Manual preview
336
Бренд: Lakeshore Страницы: 192
QUAD 33 Instruction Book preview
33
Бренд: QUAD Страницы: 16
Baader Planetarium Steeldrive II Manual preview
Steeldrive II
Бренд: Baader Planetarium Страницы: 7
Beaphar RabbitComfort Product Information preview
RabbitComfort
Бренд: Beaphar Страницы: 2
Neets echo plus User Manual preview
echo plus
Бренд: Neets Страницы: 12
National Instruments NI 9871 Operating Instructions And Specifications preview
NI 9871
Бренд: National Instruments Страницы: 24
Jetter 60873050 Manual preview
60873050
Бренд: Jetter Страницы: 24
Lantronix CWDM-CR-B Series User Manual preview
CWDM-CR-B Series
Бренд: Lantronix Страницы: 19
Netafim AlphaDisc BLE Quick Manual preview
AlphaDisc BLE
Бренд: Netafim Страницы: 4
TREND IQ422 Installation Instructions Manual preview
IQ422
Бренд: TREND Страницы: 12
Whale i Van Quick Manual preview
i Van
Бренд: Whale Страницы: 8
Tascam RC-SS20 Owner'S Manual preview
RC-SS20
Бренд: Tascam Страницы: 8
Tamiya TLU-02 Quick Start Manual preview
TLU-02
Бренд: Tamiya Страницы: 5
Quantum R-net Basic Operation Instructions preview
R-net
Бренд: Quantum Страницы: 20
FASAR ELETTRONICA FE1031 Manual preview
FE1031
Бренд: FASAR ELETTRONICA Страницы: 2
ACS 146R Instruction Manual And Technical Specifications preview
146R
Бренд: ACS Страницы: 2
Litex RCI-104 Installation And Operating Instructions preview
RCI-104
Бренд: Litex Страницы: 1
Scanreco RC400 G2B Service Manual preview
RC400 G2B
Бренд: Scanreco Страницы: 48

Бренды по названию

Популярные бренды

Загрузить еще бренды