Siemens Simatic RF600, Системное руководство

Страница: 452 / 506

Transponder
7.12 SIMATIC RF680T
SIMATIC RF600
452
System Manual, 06/2019, J31069-D0171-U001-A22-7618
6GT2810-2HG80
Permitted ambient conditions
Ambient temperature
•
In operation, during write/read access
•
-25 … +100 °C, permanent
Special features:
+100 ... +140 °C, 20 % reduction of the limit
distance
As of +140 °C, no processing possible
Up to +200 °C, tested up to 5000 hours or
3000 cycles
Up to +220 °C, tested up to 2000 hours or
1500 cycles
• In operation, outside write/read access • -40 ... +220 °C
•
During transportation and storage
•
-40 … +100 °C
3)
Distance from metal 0 mm
Designed for mounting directly on metal
Degree of protection IP68 / IPx9K
Resistance to mechanical stress Torsion and bending stress is not permitted
Shock-resistant according to DIN EN 60721-3-7,
Class 7 M3
100 g
4)
Vibration to EN 60068-2-6 20 g
4)
Design, dimensions and weight
Dimensions (L x W x D)
32 × 15 × 130 mm
Weight 50 g
Type of mounting 2 x M6 screws
≤ 1 Nm
Standards, specifications, approvals
Proof of suitability
II 2G Ex ib IIB T6 to T2 Gb,
II 2D Ex ib IIIB T135 °C Db
MTBF 1940 years
1)
The range is reduced to 70% at the band limits 902 MHz or 928 MHz. Due to frequency
fluctuations, this effect has no impact.
2)
Mounting on a flat metal surface with a diameter of at least 300 mm and at room
temperature. The information relates to the maximum read range. You will find more
information on ranges in the section "Minimum distances and maximum ranges (Page 55)".
3)
To use the transponder in hazardous areas, directive 94/9/EC of the European Council of
23 March 1994 must be complied with. Note the information in the section "Use of the
transponder in the hazardous area (Page 444)".
4)
The values for shock and vibration are maximum values and must not be applied
continuously.