Siemens Simatic RF600 Скачать руководство пользователя страница 16

Страница: 16 / 506

Safety Information

2.1 General safety instructions

SIMATIC RF600

System Manual, 06/2019, J31069-D0171-U001-A22-7618

Operating temperature

CAUTION

Increased temperatures on the lower casing
Note that the lower casing of the readers is made of metal. This means that temperatures

can occur on the lower casing that are higher than the maximum permitted operating

temperature.

CAUTION

Do not expose the readers to direct sunlight
Note that the readers must not be exposed to direct sunlight. Direct sunlight can lead to the

maximum permitted operating temperature being exceeded.

Overvoltage protection

NOTICE
Protection of the external 24 VDC voltage supply
If the module is supplied via extensive 24 V supply lines or networks, interference by strong

electromagnetic pulses on the supply lines is possible, e.g. from lightning or the switching

of large loads.
The connector for the 24 VDC external power supply is not protected against strong

electromagnetic pulses. Make sure that any cables liable to lightning strikes are fitted with

suitable overvoltage protection.

Repairs

WARNING

Repairs only by authorized qualified personnel
Repairs may only be carried out by authorized qualified personnel. Unauthorized opening of

and improper repairs to the device may result in substantial damage to equipment or risk of

personal injury to the user.

Содержание Simatic RF600



























































































































































































































































































































































































































































































































Результаты поиска

Содержание Simatic RF600

Отзывы:

Бренды по названию

Популярные бренды

Siemens Simatic RF600, Системное руководство

Результаты поиска

Содержание Simatic RF600

Отзывы:

Бренды по названию

Популярные бренды