Maintenance and service
11.2 Reinstalling the software
SIMATIC Rack PC 840 V2
11-18
Operating Instructions, Edition 05/2006, A5E00248055-04
4. Select
A:\>FDisk
the Microsoft Windows 98 hard disk configuration program (A: is the CD drive).
5. In the select form, select support for large disks to set up the FAT16 partition.
Activate support (Y/N)...?
[ N ] for no.
6. Create a primary DOS partition with 2045 MB for a FAT16 file system. When prompted
Do you want to use the maximum available space for the primary DOS partition and activate this
partition?
answer with [ Y ] for Yes.
7. Format the primary DOS partition by booting from the Recovery CD, as described above
in steps 1 to 3. The run “Format” to . At the prompt, enter:
A:\>Format C:
8. The formatting of the NTFS partitions is performed by the setup program of Windows NT.
Run Windows NT Setup.
Caution
All the data of the relevant partition will be lost during formatting.
