manualshive.com logo in svg

Siemens SIMATIC Rack PC 547B, Руководство по эксплуатации, Страница: 86 / 136

Поделиться
Скачать
Siemens SIMATIC Rack PC 547B Скачать руководство пользователя страница 86

Maintenance and service 

 

11.2 Reinstalling the software 

 

SIMATIC Rack PC 547B 

86

 

Operating Instructions, 12/2007, A5E01127519-02 

11.2.10

 

Installing updates 

11.2.10.1

 

Updating the operating system 

Windows 

The latest updates for Windows operating systems are available on the Internet at 

http://www.microsoft.com 

 

NOTICE 

 

Before you install new drivers or operating system updates for Windows MUI versions, set 

the default language to US English in the regional settings for menus and dialogs. 

Other operating systems 

Contact the corresponding manufacturer.  
 

11.2.10.2

 

Installing or updating application programs and drivers 

 

Install and connect an appropriate drive in order to install software from a CD and / or floppy 

disk in Windows. 
The USB floppy disk and CD-ROM drivers are included in Windows and do not have to be 

installed from other sources. 
For information about installation of SIMATIC software packages, refer to the corresponding 

manufacturer documentation. 
Contact the manufacturer to obtain updates of drivers and application programs you 

purchased from third-party vendors.  

 

NOTICE 

 

Before you install new drivers or operating system updates for Windows versions, set the 

default language to US English in the regional settings for menus and dialogs. 

 

Содержание SIMATIC Rack PC 547B









































































































































Отзывы:

Нет отзывов