Siemens SIMATIC Rack PC 547B Скачать руководство пользователя страница 51

Страница: 51 / 136

SIMATIC Rack PC 547B
Operating Instructions, 12/2007, A5E01127519-02

Functions

9.1

Overview of the monitoring functions

The following individual functions are implemented:
●  Temperature monitoring and over/under-temperature display
●  Watchdog
●  Fan monitoring
●  Passing the status and messages to applications (only with DiagMonitor)

Note
The monitoring software is not preinstalled. SystemGuard can be installed from the

supplied Documentation and Drivers CD. DiagMonitor can be ordered separately as an

option and ships on CD.

NOTICE

The "SystemGuard" and "DiagMonitor" software cannot be installed simultaneously.

Simultaneous installation and operation can result in errors because both programs access

the same interfaces.

A description of the drivers and SystemGuard is available on the enclosed "Documentation

and Drivers" CD in the utilities directory.

Содержание SIMATIC Rack PC 547B









































































































































Результаты поиска

Содержание SIMATIC Rack PC 547B

Отзывы:

Siemens SIMATIC Rack PC 547B, Руководство по эксплуатации, Страница: 51 / 136

Результаты поиска

Содержание SIMATIC Rack PC 547B

Отзывы: