Siemens SIMATIC Rack PC 547B Скачать руководство пользователя страница 53

Страница: 53 / 136

Functions

9.4 Fan monitoring

SIMATIC Rack PC 547B
Operating Instructions, 12/2007, A5E01127519-02

9.4

Fan monitoring

The operation of the front fan, processor fan and power unit are monitored. If a fan fails, the

status LED on the front panel is activated and this is also indicated by the monitoring

software if it is installed.
Additional information is available on the supplied "Documentation and Drivers" CD in

Utilities > Sysguard

9.5

Monitoring software

The monitoring software is not installed.
● SystemGuard can be installed from the supplied Documentation and Drivers CD. This is

located in the Utilities\Sysguard directory

● DiagMonitor can be ordered as an option.
The DiagMonitor software CD contains the monitoring software, the software for the stations

to be monitored, and a library for creating user-specific applications.

Содержание SIMATIC Rack PC 547B









































































































































Результаты поиска

Содержание SIMATIC Rack PC 547B

Отзывы:

Siemens SIMATIC Rack PC 547B, Руководство по эксплуатации, Страница: 53 / 136

Результаты поиска

Содержание SIMATIC Rack PC 547B

Отзывы: