manualshive.com logo in svg

Siemens SIMATIC PCS 7 FOUNDATION Fieldbus, Руководство по вводу в эксплуатацию

Поделиться
Скачать
Siemens SIMATIC PCS 7 FOUNDATION Fieldbus Скачать руководство пользователя страница 67

Redundancy and system changes during operation

7

7.1

Redundancy

The basic configuration of redundant FF segments corresponds to the configuration for 

PROFIBUS PA. 
Configuration with active field distributors enables the following connections of the FF segment 

to a redundant DP master system:
● Coupler redundancy with active field distributor (AFD)

A connection to a redundant DP master system on a SIMATIC S7-400H is required for 

operation with coupler redundancy.

● Ring redundancy with active field splitter (AFS)

Connection to a redundant or single DP master system is possible for operation with ring 

redundancy.

Assembling the bus link

● Ensure you use the correct type-specific bus module for the installation:

– Bus module for FF Link
– Bus module for Compact FF Link

● Possible redundant components on the FF segment:

Type of bus link

Component of the bus link which is connected to the FF segment:

FF Link

FDC 157 fieldbus coupler

Compact FF Link

Compact FF Link (IM 655)

Recommendation: 

Connect the following module to the DP master system in the rack 0 of the SIMATIC S7-400H:
● The left IM 153-2 FF interface module of the bus link.
● The left Compact FF Link of the bus link.
Additional information can be found in the following documents:
● Operating Instructions 

SIMATIC; Bus Link; FF Link

● Operating Instructions 

SIMATIC; Bus Link; Compact FF Link

● Product overview 

Process Control System PCS 7; Released Modules

●

SIMATIC; Process Control System PCS 7; Fault-tolerant Process Control Systems; section 

"Redundant PROFIBUS PA". 

FOUNDATION Fieldbus

Commissioning Manual, 02/2015, A5E32711026-AC

67

Содержание SIMATIC PCS 7 FOUNDATION Fieldbus









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды