Siemens SIMATIC PCS 7 BOX, Руководство по эксплуатации функций

Страница: 69 / 130

Requirements
The following software is installed on the SIMATIC PCS 7 BOX RTX:
● Operating system
● PCS 7
● Software package WinAC RTX
Note
Startup
The PCS 7 applications cannot be operated until the "Station Configuration Editor" has
been run (for example, the WinLC RTX operator panel).
Procedure
Select the menu command Start > SIMATIC > PC Based Control > WinAC RTX.
The operator panel with the "WinLC RTX" dialog box opens.
You can move the operator panel to the desktop and keep it open.
Example: How to stop the automation program on the CPU
1. Click "STOP" in the operator panel of the CPU.
2. Verify that the virtual signal lamp indicates "STOP" mode.
Additional information
● Manual
SIMATIC; Windows Automation Center RTX; WinAC RTX
7.4.12 How to compile and download the AS data and OS data on an external
engineering station
Introduction
The procedure in the "Compile and Download Objects" dialog box for the "SIMATIC PCS 7
BOX with external engineering station" configuration differs from that for a single-station
system in the following way:
● You need to compile and download both the configuration of the engineering station and
the configuration of the SIMATIC PCS 7 BOX station.
● You must compile and download the operator station. To do this, create an appropriate
target folder for the operator station on the SIMATIC PCS 7 BOX station. Then specify the
network path from the external engineering station to the operator station.
Commissioning and configuration of SIMATIC PCS 7 BOX RTX
7.4 Configuring SIMATIC PCS 7 BOX RTX with external engineering
BOX (V8.1)
Function Manual, 03/2015, A5E32711362-AC
69