Siemens SIMATIC PCS 7 BOX Скачать руководство пользователя

Страница: 67 / 130

9. Check the configurations in HW Config and in the Station Configuration Editor to ensure

they match. The recommended configuration is shown in section " Requirements for loading

the BOX PC (Page 46) ".

Note
Ensure that the names of the PC station match in HW Config and in the configuration in

the Station Configuration Editor of the SIMATIC PCS 7 BOX RTX.

10.Click "OK".

The Station Configuration Editor closes.

11.Select the menu command CPU > RUN.

The "Startup Type" dialog box opens.

12.Activate the "Restart" check box and click "OK".

The RUN operating mode is activated.

13.Download the PC station via NetPro.

7.4.10

How to download the BOX PC

Requirements

● You have created the PCS 7 project.
● The following components are installed on the BOX PC:

– Operating system
– PCS 7
– Software package WinAC RTX

● The settings on the BOX PC are completed in the Station Configuration Editor (see section

" Requirements for loading the BOX PC (Page 46) ".

● In the dialog box of the "Set PC Station" configuration console, the PC station access point

of BOX PC is set to "S7ONLINE: = PC internal (local)".

● If you wish to connect the BOX PC to other network components via Industrial Ethernet,

the following requirements also apply:
– The operating system network is configured.
– The network addresses of the PC stations are configured.
– The protocol for communication is set.

Procedure

Note
Perform the following tasks first for the engineering station before configuring and downloading

additional PC stations.

Commissioning and configuration of SIMATIC PCS 7 BOX RTX

7.4 Configuring SIMATIC PCS 7 BOX RTX with external engineering

BOX (V8.1)

Function Manual, 03/2015, A5E32711362-AC

Содержание SIMATIC PCS 7 BOX



































































































































Результаты поиска

Содержание SIMATIC PCS 7 BOX

Отзывы:

Похожие инструкции для SIMATIC PCS 7 BOX

Бренды по названию

Популярные бренды

Siemens SIMATIC PCS 7 BOX, Руководство по эксплуатации функций

Результаты поиска

Содержание SIMATIC PCS 7 BOX

Отзывы:

Похожие инструкции для SIMATIC PCS 7 BOX

Бренды по названию

Популярные бренды