Siemens SIMATIC NET страница 30 Скачать руководство пользователя | Manualshive

Страница: 30 / 66

background image

Device Management

3.2 Configuring the Device

Communication Ports

Connect any of the available Ethernet ports on the device to a management

switch and access the RUGGEDCOM RX1511 console and Web interfaces via the

device's IP address. The factory default IP address for the RUGGEDCOM RX1511 is

https://192.168.0.2

.

For more information about available ports, refer to

.

Note

Single-mode fiber ports only support Ultra Physical Contact (UPC) cable connectors.

3.2

Configuring the Device

Once the device is installed and connected to the network, it must be configured.

All configuration management is done via the RUGGEDCOM RX1511 interface. For

more information about configuring the device, refer to the

RUGGEDCOM ROX

Configuration Manual

associated with the installed software release.

3.3

Accessing the CompactFlash Card

The RUGGEDCOM RX1511 features a removable CompactFlash (CF) card that stores

configuration files, firmware (active and backup versions), file-based feature keys

and other system files.

NOTICE

Configuration hazard – risk of data corruption/loss

Do not remove or insert the CF card when the device is powered on.

The CF card should only be removed in the following scenarios:
• The chassis is defective (with the exception of power and media modules)
• The CF card is deemed defective or corrupt
• The device is rendered non-functional due to a serious configuration error, data

corruption, or hardware fault

NOTICE

Configuration hazard – risk of data corruption/loss

The following will void the warranty and potentially result in configuration data

corruption/loss:
• Using a CF card not approved by Siemens for use with this device
• Removing the CF card in any scenario other than those described in this section

RUGGEDCOM RX1511

Installation Manual, 04/2021, C79000-G8976-1056-20

21

«
...
28
29
30
31
32
...
»

Содержание SIMATIC NET



































































Отзывы:

Нет отзывов

Похожие инструкции для SIMATIC NET

Бренд: Garmin Страницы: 4

Бренд: Bode Страницы: 3

ProCurve J9169A

Бренд: HP Страницы: 4

ProCurve J8444A

Бренд: HP Страницы: 2

ProCurve J8445A

Бренд: HP Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 7

Бренд: Philips Страницы: 7

Бренд: Omron Страницы: 135

DXE-MBVE-1UGBRT3

Бренд: DX Engineering Страницы: 12

Бренд: DX Antenna Страницы: 3

Бренд: DX Engineering Страницы: 28

Бренд: Hughes Страницы: 98

Бренд: THOMSON Страницы: 38

Бренд: Winegard Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды