Siemens SIMATIC NET RUGGEDCOM RX1510 Скачать руководство пользователя | Manualshive

Страница: 30 / 66

background image

Device Management

3.2 Configuring the Device

Communication Ports

Connect any of the available Ethernet ports on the device to a management

switch and access the RUGGEDCOM RX1510 console and Web interfaces via the

device's IP address. The factory default IP address for the RUGGEDCOM RX1510 is

https://192.168.0.2

.

For more information about available ports, refer to

.

Note

Single-mode fiber ports only support Ultra Physical Contact (UPC) cable connectors.

3.2

Configuring the Device

Once the device is installed and connected to the network, it must be configured.

All configuration management is done via the RUGGEDCOM RX1510 interface. For

more information about configuring the device, refer to the

RUGGEDCOM ROX

Configuration Manual

associated with the installed software release.

3.3

Accessing the CompactFlash Card

The RUGGEDCOM RX1510 features a removable CompactFlash (CF) card that stores

configuration files, firmware (active and backup versions), file-based feature keys

and other system files.

NOTICE

Configuration hazard – risk of data corruption/loss

Do not remove or insert the CF card when the device is powered on.

The CF card should only be removed in the following scenarios:
• The chassis is defective (with the exception of power and media modules)
• The CF card is deemed defective or corrupt
• The device is rendered non-functional due to a serious configuration error, data

corruption, or hardware fault

NOTICE

Configuration hazard – risk of data corruption/loss

The following will void the warranty and potentially result in configuration data

corruption/loss:
• Using a CF card not approved by Siemens for use with this device
• Removing the CF card in any scenario other than those described in this section

RUGGEDCOM RX1510

Installation Manual, 04/2021, C79000-G8976-1055-20

21

«
...
28
29
30
31
32
...
»

Содержание SIMATIC NET RUGGEDCOM RX1510



































































Отзывы:

Нет отзывов

Похожие инструкции для SIMATIC NET RUGGEDCOM RX1510

Бренд: Niveo Страницы: 155

Бренд: Southern Enterprises Страницы: 4

Бренд: Speedtouch Страницы: 124

Бренд: Ubiquiti Страницы: 20

Бренд: AMG Systems Страницы: 2

Бренд: GiHome Страницы: 6

Бренд: Oase Страницы: 44

Бренд: Celsicom Страницы: 4

Бренд: RADWAG Страницы: 58

Бренд: Avid Technology Страницы: 10

Бренд: Allmatic Страницы: 8

Бренд: IFM Страницы: 9

Radiodetection RD8100

Бренд: SPX Страницы: 54

Бренд: Enterasys Страницы: 62

Бренд: SNAIGE Страницы: 32

Бренд: netvox Страницы: 10

Бренд: Quantum Страницы: 108

Бренд: Patton electronics Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды