Certification
6
The RUGGEDCOM RS940G device has been thoroughly tested to guarantee its
conformance with recognized standards and has received approval from recognized
regulatory agencies.
6.1
Approvals
This section details the standards to which the RUGGEDCOM RS940G complies.
6.1.1
CSA
This device meets the requirements of the following Canadian Standards Association
(CSA) standards under certificate 1550963:
•
CAN/CSA-C22.2 No. 0-M91
General Requirements - Canadian Electrical Code, Part II
•
CAN/CSA-C22.2 No. 142-M1987
Process Control Equipment Industrial Products
•
CAN/CSA-C22.2 No. 213-16
Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class
III, Divisions 1 and 2 Hazardous (Classified) Locations (Bi-National Standard with
ANSI/ISA-12.12.01-2016)
•
UL 916
Standard for Energy Management Equipment
•
ANSI/ISA-12.12.01-2015
Non-Incendive Electrical Equipment for Use in Class I and II, Division 2 and Class
III, Division 1 and 2 Hazardous (Classified) Locations
The device is marked with a CSA symbol that indicates compliance with both
Canadian and U.S. requirements.
C
US
It is specifically approved for use in hazardous locations defined as:
• Class I, Division 2, Groups A, B, C, D
RUGGEDCOM RS940G
Installation Manual, 01/2021, C79000-G8976-1036-07
31
