Introduction
CP 1623
4
Operating Instructions (Compact), 02, A5E01175608
Introduction
1
Content of the document
These operating instructions (compact) contain the information you require to install and
commission the CP 1623 communications processor.
Further information on the CP 1623
Note
If the CP 1623 is not named specifically in the documentation listed below, the same
restrictions apply as for the CP 1613.
Table 1-1
Structure of the documentation for the CP 1623
Name of the document
Why you should read it
Operating Instructions (compact)
CP 1623
This provides a step-by-step guide to installing the CP 1623
in your PC.
Configuration Manual
Commissioning PC Stations
This contains the information required to commission and
configure a SIMATIC NET communications module.
Manuals
•
SIMATIC NET Industrial Communication with PG/PC
Part 1 – Basics
•
SIMATIC NET Industrial Communication with PG/PC
Part 2 – Interfaces
This manual introduces you to industrial communication and
explains the available communication protocols. It also
describes the OPC interface as a user programming
interface.
Manual
Configuring Hardware and Communication Connections with
STEP 7
This contains instructions on configuring a plant.
Manual
Time-of-Day Functions of the CP 1613
This manual supports you when you want to include the
time-of-day functions of the CP 1613/CP 1623
communications processor in your user programs.
Readme file
of the "SIMATIC NET, PC Software" product CD
This contains important information on SIMATIC NET PC
software products.
Online helps
Detailed information
Installation Instructions on the "SIMATIC NET, PC Software"
CD (German and English)
This document provides you with the information required to
install the products of the "SIMATIC NET, PC Software" on
your PG/PC.
