2
Automation
Solution
2.4
Overview and description of the user interface
14
Evaluating An Access Point Clients List
V1.0, Entry ID: 48946495
C
opyr
ight
Si
em
ens
AG
20
1
1
A
ll rig
h
ts
re
se
rve
d
No.
Block
Remarks
7. FC16
EvaluationAccessPoint_02
The evaluation of the “clients list” for the second
access point is through the FC16.
The “FB3” is called through the FC16 to read out the
“MIB variables”.
Furthermore there is the call of the FC220. Through
the FC220 there is a comparison between the read in
MAC addresses and the
MAC addresses of the mobile panels used.
8. FC220
COMPARE_DATABLOCK
Through the FC220 there is a comparison between
the read in MAC addresses and the
MAC addresses of the respective mobile panel.
9. DB3
DIGetRequest_1
Instance data block for the FB3
(evaluation for the first mobile panel)
10. DB4
DIGetRequest_2
Instance data block for the FB3
(evaluation for the second mobile panel)
11. DB10
HMI_Tags
Data block for the output of the results to the mobile
panel.
12. DB15
AccessPoint_01_SetValue
The data block is used for the evaluation of the FB3.
The “clients list” of
access point 1 is evaluated through FB3.
For each access point used a data block is
configured.
Note:
do not change the structure of the block.
13. DB16
AccessPoint_01_SetValue
The data block is used for the evaluation of the FB3.
The “clients list” of
access point 2 is evaluated through FB3.
For each access point used a data block is
configured.
Note:
do not change the structure of the block.
14. DB20
AccessPoint_01_MIB_List
The data block contains the “MIB addresses” to read
out the MAC addresses from the “clients list” of
access point 1.
See also Figure 2-2.
“FB3” calls this data block and successively reads in
the MIB addresses listed in the DB.
15. DB21
AccessPoint_02_MIB_List
The data block contains the “MIB addresses” to read
out the MAC addresses from the “clients list” of
access point 2.
See also Figure 2-2.
“FB3” calls this data block and successively reads in
the MIB addresses listed in the DB.
