Siemens SIMATIC IPC627E, Руководство по эксплуатации

Страница: 118 / 164

Technical specifications
8.8 Technical specifications of graphic
SIMATIC IPC627E
118
Operating Instructions, 12/2018, A5E44297201-AA
8.8 Technical specifications of graphic
See the note in "Applicability of technical specifications (Page 109)".
Graphics controller
•
Core i7: Intel® UHD Graphics 630
•
Core i3: Intel® UHD Graphics 630
•
Celeron: Intel® UHD Graphics 610
Graphics memory 32 - 4 GB Shared Memory
Resolutions/frequencies/colors DVI: 640 × 480 to 1920 × 1200 / 80 Hz / 24 bit
DisplayPort: max. 3840 ×2160 / 130 Hz / 30 bits
8.9 Technical specifications of the interfaces
Observe the information in "Applicability of technical specifications (Page 109)" and use only
original connections of the I/O to be connected.
DisplayPort
4
2 x connection of DisplayPort monitor
DVI-D Connection of DVI monitor, with adapter also VGA monitor
Keyboard USB support
Mouse USB support
USB 4 × USB 3.1, type A, high current, backward compatible
2 × USB 3.1, type C, high current, backward compatible
Ethernet
1
3 × Ethernet interface (RJ45), 10/100/1000 Mbps
• 1 x Ethernet 1: Intel® Jacksonville i219-LM; AMT-capable
4
•
2 x Ethernet 2, 3: Intel® Springville i210-AT
Wake on LAN, Remote Boot and the following Teaming modes are
supported:
•
Adapter Fault Tolerance (AFT)
• Adaptive Load Balancing (ALB)
•
IEEE 802.3ad Dynamic Link Aggregation (DLA)
• Static Link Aggregation (SLA)
•
Switch Fault Tolerance (SFT)
COM1 RS232, 115 kbps max., 9-pin SUB-D, male
Free slots for expansion
cards (see Motherboard
(Page 135))
Versions with 2 and 5 PCI(e) cards
1
For unique labeling, the Ethernet ports are numbered on the enclosure. The numbering by the
operating system can differ.
2 No teaming with AMT.
3
When using AMT, the interface X1P1 must be used for connection to remote maintenance.
4 An analog monitor can be used with an adapter cable (optional).