Siemens SIMATIC IPC2 7G Series, Руководство по эксплуатации

Страница: 21 / 37

Configure firmware
2.6 "Power" tab
Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G
Operating Instructions, 09/2021, A5E50059883-AB
21
Firmware setting Value Setting in delivery
state
Meaning
Set User Password Here you can set a user password for limited access to the
firmware settings.
After correct entry of the user password, it can be
changed by entering a new one. If no password is
entered and only the <Enter> key is pressed, the
configured user password is deleted.
Password Management
Interface
Enabled x x The interface for password configuration is enabled.
The password settings can be configured via the
software.
You need the current password to make changes.
Disabled The interface for password configuration is disabled.
The password settings can only be configured via the
firmware settings.
1
: Only visible with device configuration with Trusted Platform Module(TPM) (Page 31).
2
: Only visible after you set the "Supervisor Password".
2.6 "Power" tab
Device behavior after a power failure and after a "wake event".
Calling "Power" tab
Select: "Setup Utility (Page 11)" > "Power".
Firmware setting Value Setting in delivery
state
Meaning
IPC227G
IPC277G IPC327G
IPC377G
Advanced CPU Control
(Page 23)
Control various CPU parameters
Wake on LAN 1 (X1 P1) Enabled The LAN controller of the onboard Ethernet interface "X1 P1"
can wake from S4.
Disabled x x The LAN controller of the onboard Ethernet interface "X1 P1"
cannot wake from S4.
Wake on LAN 2 (X2 P1) Enabled The LAN controller of the onboard Ethernet interface "X2 P1"
can wake from S4.
Disabled x x The LAN controller of the onboard Ethernet interface "X2 P1"
cannot wake from S4.
Wake on LAN 3 (X3 P1)
Only with:
IPC227G
IPC277G
Enabled The LAN controller of the onboard Ethernet interface "X3 P1"
can wake from S4.
Disabled x The LAN controller of the onboard Ethernet interface "X3 P1"
cannot wake from S4.
XHCI USB Wake
Capability
Enabled The Wake Capability of all XHCI USB Ports is enabled.
Disabled x x The Wake Capability of all XHCI USB Ports is disabled.
USB Port X60 Wake
Capability
Enabled The USB port X60 is allowed to wake up the system from the
S4/S5.