Configure firmware
2.4 "Advanced" tab
Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G
Operating Instructions, 09/2021, A5E50059883-AB
15
Firmware setting Value
Setting in delivery
state
Meaning
Interrupt
Only with:
IPC327G
IPC377G
IRQ3/IRQ4/IRQ5/IRQ6
/IRQ7/IRQ10/IRQ11
IRQ6
The interrupt is pre-assigned and also recommended.
Peripheral Type
Only with:
IPC327G
IPC377G
RS232
x
Non-isolated connection for short distances in
interference-free environment.
Onboard Ethernet
1 (LAN 1, X1 P1)
control
own by NONE
The onboard Ethernet interface "X1 P1" is disabled.
own by PSE(ARM)
The onboard Ethernet interface "X1 P1" is controlled by
PSE.
own by PCH(x86)
x
x
The onboard Ethernet interface "X1 P1" is controlled by
PCH.
Onboard Ethernet
1 Address:
The Onboard Ethernet 1 address is defined with this
value.
Onboard Ethernet
2 (LAN 2, X2 P1)
control
own by NONE
The onboard Ethernet interface "X2 P1" is disabled.
own by PSE(ARM)
The onboard Ethernet interface "X2 P1" is controlled by
PSE.
own by PCH(x86)
x
x
The onboard Ethernet interface "X2 P1" is controlled by
PCH.
Onboard Ethernet
2 Address:
The Onboard Ethernet 2 address is defined with this
value.
Onboard Ethernet
3 (LAN 3, X3 P1)
control
Only with:
IPC227G
IPC277G
Enabled
x
The onboard Ethernet interface "X3 P1" is enabled.
Disabled
The onboard Ethernet interface "X3 P1" is disabled.
Onboard Ethernet
3 Address:
Only with:
IPC227G
IPC277G
The Onboard Ethernet 3 address is defined with this
value.
*The Ethernet addresses are merely an example.
