Installing and connecting the device
3.4 Connecting the power supply
IFP2200 INOX MT ETH
22
Compact Operating Instructions, 03/2018, A5E42185570-AA
3.4
Connecting the power supply
The specifications in the operating instructions "Industrial Flat Panel IFP1500, IFP1900,
IFP2200, IFP1900 PRO, IFP1900 ETH, IFP2200 ETH" apply. Refer to the section
"Connecting a DC power supply" for information on connecting the power supply.
You can operate the device with the following voltage:
●
24 V DC, 2-pin
Note
To turn off the device completely, disconnect it from the power supply. The device does not
have an on/off switch.
Note
The device may only be connected to a 24 V DC power supply that meets the requirements
of a safe extra-low voltage (SELV/PELV) e.g. according to IEC/EN/DIN EN/UL 60950-1.
3.4.1
Securing the cables
Use cable ties to secure the connected cables to the selected fixing elements for strain relief.
Make sure that the cables are not crushed by the cable tie.
