Siemens SIMATIC FS600, Инструкция по эксплуатации

Страница: 86 / 110

86
11.4.2 Checklist for Daily Test of Mobile Applications by Responsible Operating
Personnel
If the answer to any of the questions above is No, have the vehicle checked by a trained
specialist.
1) Are there any problems in the external state of the protective
equipment, the cable, cable connections and any command
devices or any command devices?
Yes No
2) Are the fastening screws in the mounting system firmly
connected?
Yes No
3) Are the fastening screws in the SIMATIC FS600 Laser Scanner
firmly connected?
Yes No
4) Are both protective caps (X1 and X2) screwed on and are the
firmly in place?
Yes No
5) Do the safety equipment and command devices show any safety-
relevant changes or gaps in safety (e.g. by widening the vehicle)?
Yes No
6) If the protective function of the SIMATIC FS600 Laser Scanner is
present for all required monitoring cases (e.g. testing the switch-
off function with a test piece along the detection zone contour, the
LED3 for SIMATIC FS600 Laser Scanner must light up with each
attempt and the movement that poses a danger must be stopped
immediately. Possibility of danger to the person running the test
must be excluded)?
Yes No
7) Does the vehicle actually stop within the limits defined by the
responsible specialist (test of switch-function using a test piece. Is
the possibility of danger to the person running the test excluded)?
Yes No
8) Is the startup test/restart interlock (if there is one) working? Yes No
9) Do the necessary detection zones match the configuration
protocol?
Yes No
10) If correct functionality is not certain or id the SIMATIC FS600
Laser Scanner LED 5 is flashing, take the vehicle out of operation
immediately. Are any doubts resolved?
Yes No