Siemens SIMATIC 427B-HMI/RTX Скачать руководство пользователя страница 26

Страница: 26 / 56

Product Overview

1.6 Additional information about WinAC RTX

Microbox 427B-RTX/ -HMI/RTX and Panel PC 477B-HMI/ -HMI/RTX

Manual, 12/2007, A5E01217837-01

1.6

Additional information about WinAC RTX

This topic applies only to the Microbox 427B-RTX/ -HMI/RTX and Panel PC 477B-HMI/RTX

and is not applicable for the Panel PC 477B-HMI.
The PC-based controller, WinLC RTX, that executes on Microbox 427B-RTX/ -HMI/RTX and

Panel PC 477B-HMI/RTX, is the same WinLC RTX controller that executes on standard

PCs. The internal software is the same. Some differences exist, however, in how you install

and license WinAC RTX, and how WinLC RTX interacts with the operating system and

hardware. The documentation for WinAC RTX that you have with your Microbox 427B-RTX/

-HMI/RTX and Panel PC 477B-HMI/RTX products describes the functionality of the standard

WinAC RTX product that executes on a Windows XP / Windows XPembedded computer.

Differences between WinLC RTX use in WinAC RTX and Embedded Bundles

The behavior is mostly the same, but with the following notable differences:

Table 1-1

Differences between WinLC RTX use in WinAC RTX and Embedded Bundles

SIMATIC Embedded PC

WinAC RTX

Installation

Microbox 427B-RTX/ -HMI/RTX and Panel PC

477B-HMI/RTX includes the WinAC RTX

installation. No further installation is necessary.

The First Boot Agent of Windows XP embedded

runs the first time you start the PC and finalizes

the installation. You do not have to perform any

additional configuration. After the First Boot Agent

completes, the PC requests a reboot.
The Installation chapter of the WinAC RTX

documentation is not applicable for Microbox

427B-RTX/ -HMI/RTX and Panel PC 477B-

HMI/RTX.

Siemens distributes WinAC RTX as a software-

only product. You must install WinAC RTX on a

PC as described in the Installation chapter of the

WinAC RTX documentation.

Licensing

You do not have to install the WinAC RTX license

keys on Microbox 427B-RTX/ -HMI/RTX and

Panel PC 477B-HMI/RTX. You will need to use

the Automation License Manager (ALM) to:

•

Remove the WinAC RTX license key, prior to

making a custom restore CD

•

Remove the WinAC RTX license key, prior to

restoring an image with a custom restore CD

•

Move license keys for other reasons

You use the Automation License Manager to

license WinAC RTX as described in the

"Licensing the WinAC RTX Software" topic of the

Installation chapter of the WinAC RTX

documentation.

Содержание SIMATIC 427B-HMI/RTX

























































Результаты поиска

Содержание SIMATIC 427B-HMI/RTX

Отзывы:

Похожие инструкции для SIMATIC 427B-HMI/RTX

Бренды по названию

Популярные бренды

Siemens SIMATIC 427B-HMI/RTX, Руководство пользователя

Результаты поиска

Содержание SIMATIC 427B-HMI/RTX

Отзывы:

Похожие инструкции для SIMATIC 427B-HMI/RTX

Бренды по названию

Популярные бренды