Siemens SIMATIC 427B-HMI/RTX, Руководство пользователя

Страница: 34 / 56

User Tasks
2.1 Creating and configuring the STEP 7 Project
Microbox 427B-RTX/ -HMI/RTX and Panel PC 477B-HMI/ -HMI/RTX
34
Manual, 12/2007, A5E01217837-01
RTX Configuration:
● "OPC Server" in index 1 of the PC station
● "WinLC RTX" (Windows Logic Controller of WinAC RTX 2005) in index 2 of the PC
station
● Built-in "CP 5611," configured as a WinLC RTX submodule in IF1, available for
PROFIBUS DP communication
● Second on-board Industrial Ethernet interface ("Ethernet 2"), configured as "IE_General"
in index 3 of the PC Station
The picture below shows the STEP 7 configuration for the Microbox 427B-RTX:
Figure 2-2 Microbox 427B-RTX STEP 7 Configuration
To change property settings for any object in the PC Station, right-click the object in the PC
Station, and select the "Object Properties" menu command. STEP 7 displays a properties
dialog from which you can make any necessary changes.
When you configure the Industrial Ethernet interface in the PC Station, make sure that you
use the IP address and subnet mask configured in the Windows Control Panel of the target