Siemens SIMADYN D FM 458 Скачать руководство пользователя страница 113

Страница: 113 / 123

Configuring

4-58

Application Module FM 458 - User Manual

6DD1904-0AE0 Edition 12.2001

There are two possibilities:

•

Manually enter the individual tabular parts at the DB in the

"LAD/STL/CSF" application and then transfer this part of the table

•

Generate individual source files with different names for each table

sub-set and after being successfully linked-into the DB one after the
other, then transfer

In order to subsequently download tabular values into a DB manually, the
following steps should be carried-out:

•

The appropriate DB should be opened by double-clicking in the

"LAD/STL/CSF" application.

•

The existing tabular values should be replaced by entering the value of

the subsequent tabular section.

•

The DB should be saved.

•

The values of the table sub-sets can now be transferred.

The following steps have to be carried-out when subsequently
downloading tabular values into a DB by generating several source files:

•

The same DB name should be specified in the header of the individual

source files (*.AWL).

•

The individual files may not exceed the memory size of the DB.

•

The file names are best numbered in an increasing sequence.

•

The individual files are now linked-in as source files as described

above. However, they are still not compiled.

•

The first source file is compiled and the tabular values, now available

in the DB, transferred.

•

The second source file is compiled so that its tabular values are now

available in the DB. These are now transferred to the S7 control
system.

•

Analog to this, the other source files are compiled and transferred one

after the other.

•

After the last table sub-set has been transferred, the LASTDB

connection should be set from 0 to 1. This signals that the table has
been transferred.

4.5.3.5 Structure of the data telegram for TCP/IP or DUST1 connection

If the communications link involves a TCP/IP or DUST1 coupling, then the
data telegram structure must be carefully observed. This is described in
the following. The data telegrams are "generated" using the function
blocks CTV and CRV.

Manual entry

Generating several
source files

Содержание SIMADYN D FM 458




























































































































Результаты поиска

Содержание SIMADYN D FM 458

Отзывы:

Бренды по названию

Популярные бренды

Siemens SIMADYN D FM 458, Руководство пользователя

Результаты поиска

Содержание SIMADYN D FM 458

Отзывы:

Бренды по названию

Популярные бренды