E:17
E:16
E:18
Trouble Shooting Minor Faults
!
Risk of electric shock
Turn the program selector to “Off” .
Disconnect the washer-dryer from the mains.
Turn off the water tap.
Call Customer Service.
If repaires are needed, and assuming that you
cannot eliminate the fault yourself with the aid
the following table:
Repairs must only be carried out by our
Customer Service or an authorized technician.
A signal emitted
in display field
Possible cause
Action
Check whether laundry is trap-
ped in door;
Close the washing machine door.
Door not colosed properly.
Clean filter, see page 36.
Water pressure too low.
Tap not turned on.
Inlet hose kinked or pinched.
Filter blocked in water inlet
hose.
Turn the tap on.
Eliminate cause.
Eliminate cause.
Drainage pipe blocked
.
Clean the drainage pipe.
Lose debris is blocking the
pump
.
Clean the pump, see page 34
.
38
There is too much residual
water in the drum when drying
Stop the drying process, select
the “ Single Spin” before drying .
