background image

Loading the laundry

The following textiles should not be tumble-dried:

=Do not tumble-dry

Laundry marked with the care symbol:

- Wollens or items containing wool. 

Risk of shrinking!

- Delicate fabric (silk, synthetic net curtains). 
  

Risk of creasing.

- Items containing foam rubber or similar material.

- Items which have been treated with inflammable
  solvents, such as stain removes, petrol, paint
  thinners. 

Explosion hazard!

- Items still containing hair lacquer or similar 
  substances. 

Dangerous vapors!

- Dripping-wet laundry.  

Waste of energy!

Risk of explosion

Items of clothing that have been pretreated with
solvent-based cleaning agents, e.g. Stain remover
and dry cleaning spirit, represent an explosion
hazard once loaded into the washer-dryer.
Therefore, these items must be rinsed thoroughly
by hand.

Caution:

Loose debris in the washer-dryer drum can damage
the laundry. Before loading the laundry, check that
there is no debris in the drum.

Open the loading door.

Unfold the sorted items of clothing and place 
them loosely into the drum. Mix up large and 
small items. Items of varying size will distribute 
better during the spin cycle..

Do not exceed the maximum load: Overloading
will cause poor wash/dry results and encourage
creasing.

When washing/drying a small amount of laundry, 
the washer-dryer automatically reduces the 
amount of the water and energy used.

Close the loading door.
Take care not to trap any items of clothing 
between the loading door and rubber seal.

20

Содержание Silver WD7025























































Отзывы: