Siemens SIDOOR AT12 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 48

Siemens SIDOOR AT12 Скачать руководство пользователя страница 7

Introduction

1

The comfort elevator door drive AT12 is an "intelligent" door drive with which the cabin and

shaft doors can be opened and closed at adjustable speeds and accelerations. This

maintenance-free drive unit consists of a speed-controlled DC motor with non-self-locking

gearing. The power is transmitted by a toothed belt. The toothed belt passes over a deflector

pulley, and can be fitted with two clutch holders. This enables it to drive both single-sided

and centrally-opening doors.

The AT12 is currently supplied with the following motor:
– 24 V / 1.8 A motor, suitable for a maximum total door panel weight of 120 kg

The door drive can be ordered with the drive pinion either on the left or right-hand side,

please see the drawing in the Appendix.
Operation of the door drive does not require limit switches.
The door width and the

"OPEN" and "CLOSED" positions are determined automatically.

An LED display on the controller indicates the current operating states.
The Appendix includes all the important dimension drawings, an assembly suggestion, and

the identification numbers for ordering the individual drive components.

Note
For reasons of clarity, these operating instructions do not contain complete, detailed

information about all product types. Similarly, they cannot cover every conceivable type of

installation, operation or maintenance.
Additional information about this product and its application can be found in the Internet

(

www.siemens.com/sidoor

).

Furthermore, the contents of these Operating Instructions shall not become a part of or

modify any prior or existing agreement, commitment, or legal relationship. The sales contract

contains the entire obligation of SIEMENS. The warranty contained in the contract between

the parties is the sole warranty of SIEMENS. Any statements contained in these operating

instructions neither expand nor restrict the scope of these contractual warranty conditions.

Elevator door drive AT12
Manual, 02/2012, A2B00086683A-04

7

«
...
5
6
7
8
9
...
»

Содержание SIDOOR AT12

















































Отзывы:

Нет отзывов