Siemens SICLOCK TC100 Скачать руководство пользователя | Manualshive

Страница: 3 / 124

background image

Siemens AG
I IA CE EDM
Frauenauracher Strasse 98
D-91056 Erlangen
Germany

©

Siemens AG 2010

Technical data subject to change.

Safety notices

This manual contains information that must be observed to ensure your personal safety and to prevent
property damage. The notices referring to your personal safety are highlighted in the manual by a safety
alert symbol, notices referring to property damage only, have no safety alert symbol. Depending on the
hazard level, warnings are displayed in descending order as follows:.

In the event of a number of levels of danger prevailing simultaneously, the warning corresponding to the
highest level of danger is always used. A warning with a warning triangle indicating risk of physical injury
may also include a warning of the risk of damage to property.

Qualified personnel

The associated device/system may only be installed and used in conjunction with this documentation.
Only

qualified personnel

should be allowed to commission and operate the device/system. For the pur-

pose of the safety information in this documentation, a “qualified person” is someone who is authorized to
energize, ground, and tag equipment, systems, and circuits in accordance with established safety
procedures.

Intended use

Please note the following:

Registered Trademarks

All designations with the trademark symbol ® are registered trademarks of Siemens AG. Other designa-
tions in this documentation may be trademarks whose use by third parties for their own purposes can vio-
late the rights of the owner.

Disclaimer of liability

We have checked that the contents of this publication agree with the hardware and software described
here. Nevertheless, we cannot assume responsibility for any deviations that may arise. The information
given in this publication is reviewed at regular intervals and any corrections that might be necessary are
made in the subsequent editions.

Danger

indicates that death or serious injury

will

result if proper precautions are not taken.

Warning

indicates that death or serious injury

may

result if proper precautions are not taken.

Caution

with a warning triangle indicates that minor personal injury can result if proper precautions are not taken.

Caution

without a warning triangle means that material damage can occur if the appropriate precautions are not
aken.

Notice

means an undesirable result or state can occur if the corresponding instruction is not followed.

Warning

This equipment is only allowed to be used for the applications described in the catalog and in the technical
description, and only in conjunction with non-Siemens equipment and components recommended by
Siemens. Correct transport, storage, installation and assembly, as well as careful operation and maintenance,
are required to ensure that the product operates safely and without faults.

«
1
2
3
4
5
...
»

Содержание SICLOCK TC100





























































































































Отзывы:

Нет отзывов

Похожие инструкции для SICLOCK TC100

Бренд: La Crosse Technology Страницы: 2

Бренд: Medion Страницы: 129

Бренд: anko Страницы: 16

Бренд: Suunto Страницы: 25

Бренд: Wisoee Страницы: 2

Бренд: Muji Страницы: 1

Бренд: Hema Страницы: 2

Бренд: Akai Страницы: 2

Бренд: Akai Страницы: 4

Бренд: Akai Страницы: 23

Бренд: Bush Страницы: 23

Бренд: La Crosse Страницы: 12

Бренд: Konig Страницы: 27

Бренд: Konig Страницы: 30

Бренд: Telefunken Страницы: 15

Бренд: Telefunken Страницы: 15

Бренд: GARNI Страницы: 2

Бренд: Scarlett Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды