Siemens Set CEM CERT, Руководство по эксплуатации, Страница: 9 / 128

Set CEM CERT
Operating Instructions, 06/2021, A5E34491309-12
7
Introduction
1
1.1 Purpose of this document
This instruction manual contains all the information you need for commissioning and
using the system.
It is aimed at all persons involved in the mechanical installation, electrical connection
and commissioning of the system and who work with the system.
Read this instruction manual carefully and make sure that you understand its contents
before you work with the system.
1.2 History
The following table includes information on the different editions of this document.
Table 1- 1 History
Edition Comment
03/2020 First edition
05/2021 Local user interface (LUI) revised
1.3 Intended use
Proper use within the context of this document means that the product may be used only
for the applications described in the catalog or the technical description, and only in
combination with the equipment, components and devices of other manufacturers
recommended or permitted by Siemens.
The product described in this document has been developed manufactured, tested and
documented in compliance with relevant safety standards. When the handling rules
described for the configuration, installation, proper operation and maintenance, as well
at the safety guidelines are adhered to, therefore, there is normally no risk to the health
of persons or in respect to damage to property.
This product was designed to ensure safe isolation of the primary and secondary circuits.
Low voltages that are connected must therefore also be generated with safe isolation.