Siemens Set CEM CERT Скачать руководство пользователя страница 80

Страница: 80 / 128

Operation

8.4 Menu-based operation

Set CEM CERT

Operating Instructions, 06/2021, A5E34491309-12

8.4.4

Maintenance

This is the input menu for the maintenance work. The individual maintenance options
are jumped to from here.

The keys or display elements have the following meaning:

Operator
control

Key

Meaning

Opens the Pump (Page 79) menu.

The same function can be selected using the button

in the

information area.

Activate/deactivate manual cabinet maintenance.

•

Active: Symbol has yellow background, measured values are invalid.

•

Inactive: Symbol has gray background, cabinet is not undergoing manual
maintenance, measured values are OK.

The same function can be selected using the button

in the

information area.

Opens the Operating hours counter (Page 82) menu

The same function can be selected using the button

in the

information area.

Opens the maintenance menu Diagnostics (Page 83)

The same function can be selected using the button

in the

information area.

The meaning of the remaining keys and display elements is described in the section
Standard keys/touch-sensitive elements (Page 50).

Содержание Set CEM CERT

































































































































Результаты поиска

Содержание Set CEM CERT

Отзывы:

Siemens Set CEM CERT, Руководство по эксплуатации, Страница: 80 / 128

Результаты поиска

Содержание Set CEM CERT

Отзывы: